TRD Pro Front Skid Plate

Help keep the underbelly of your Tacoma safe from vengeful boulders with the TRD Pro front skid plate.

• Enhances Tacoma’s tough, capable stance.
• Helps protect vehicle underbody from damage that can result from flying stones, branches, ice chunks and other types of road debris.
• Made from stamped and formed 1/4-in.-thick silver powder-coated aluminum.
• Skid plate won’t interfere with or block the cooling system, while providing cutouts for unobstructed access to all maintenance points and vehicle tow hooks.
• Rigorous CAD simulations conducted by Toyota engineers, in addition to real world testing, help to maximize protection and prevent vibration stress and noise issues.
• Easy, no-drill installation uses vehicle’s existing attachment mounts.
• Skid plate colors may vary.

TRD Pro Performance Exhaust System

Energize the brute within with some deep breathing exercises. The TRD Pro exhaust gives your engine greater power with a less restrictive path, while bellowing out a deep, throaty tone.

• Made from premium stainless steel grades, and featuring a cat-back design with a single TRD logo-etched exhaust tip.
• Allows for a less restrictive path, helping reduce backpressure for added low-to mid-range torque, along with improved horsepower.
• Produces a deep, throaty, exhaust note while meeting the legal 95-decibel noise limit, as required by law.

TRD Pro Shift Knob

Enhance your connection to your Tacoma every time you shift with the TRD PRO shift knob. Delivers an enhanced shifting feel while providing an impressive addition to your interior.

TRD Performance Dual Exhaust System

Breathe deeply and awaken the beast within. The TRD exhaust gives your engine greater power with a less restrictive path, while bellowing out a deep, throaty tone.

• Stainless steel, cat-back exhaust design with dual TRD logo-etched tips.
• Allows for a less restrictive path, helping reduce back pressure for added low- to mid-range torque, along with improved horsepower.
• Produces a deep, throaty, award-winning exhaust note while meeting the legal 95-decibel noise limit, as required by law.

TRD Pro Bilstein^® Shocks With Remote Reservoirs and TRD-Tuned Front Springs

Rough terrain can make for hard landings, but these TRD Bilstein^® shocks take the edge off some of the intense abuse. You’ll get additional wheel travel and a softer ride, with no compromise in on-road stability.

• Large 2.5-in. TRD Bilstein^® shocks with remote (piggyback) reservoirs front and rear for increased oil capacity, cooling and durability.
• All tuning done in house by TRD engineers (by enthusiasts, for enthusiasts).
• Zinc finish with multilayer coating for extreme surface durability.
• ZoneControl Technology^® integrates internal hydraulic bump stops into progressive three-stage position sensitive compression control for extreme off-road demands.
• 60 mm digressive pistons for improved ride comfort and more control at high speeds over rough terrain.
• Red TRD-tuned front Eibach^® coil springs with custom rates that are softer for a better ride both on- and off-road.
• Engineered by TRD with unique components and tuned by TRD engineers to provide better ride quality and off-road performance.

TRD Pro Front Skid Plate

The TRD Pro front skid plate helps keep the underbelly of your Tundra well-armored against damage from flying stones, branches, ice chunks and other types of road debris. It is crafted of stamped and formed 1/4-in.-thick silver powder-coated aluminum, and tested to ensure that it helps provide protection while preventing vibration stress and noise issues.

• Enhances Tundra’s tough, capable stance.
• Helps protect vehicle underbody from damage that can result from flying stones, branches, ice chunks and other types of road debris.
• Made from stamped and formed 1/4-in.-thick silver powder-coated aluminum.
• Skid plate won’t interfere with or block the cooling system, while providing cutouts for unobstructed access to all maintenance points and vehicle tow hooks.
• Rigorous CAD simulations conducted by Toyota engineers, in addition to real-world testing, help to maximize protection and prevent vibration stress and noise issues.
• Easy, no-drill installation uses vehicle’s existing attachment mounts.

TRD Pro Shift Knob (A/T)

Good looks and a solid shift feeling every time. The TRD Pro shift knob is sculpted and polished to give you both.

• Delivers an enhanced shifting feel while providing an impressive addition to your interior.
• Simple remove-and-replace installation with no drilling or special tools required.

TRD Pro Carpet Floor Mats

Be one with the dirt, but keep your carpet pristine, thanks to TRD Pro floor mats. Featuring the TRD Pro logo, they are designed to fit the footwell of your Tundra just right.

• Help protect the original carpet from wear and stains.
• Designed to fit the vehicle’s floor pattern.
• Made of durable, fade-resistant carpeting.
• Quarter-turn fasteners (on the driver’s side) and nibbed backing on all mats help keep mats in position.
• Removable and easy to clean.

TRD Pro “TOYOTA” Grille

Make a bold statement. The TRD Pro grille’s matte-black finish and bold lettering announce some serious intentions.

• Inspired by old-school front “TOYOTA” grilles of yesteryear.
• Matte-black finish.

TRD Pro Bilstein^® Shocks With TRD-Tuned Front Springs

The roads to the best destinations have the roughest terrain. These TRD Bilstein^® shocks take the edge off some of the intense abuse of hard landings. You’ll get additional wheel travel and a better ride off-road, with no compromise in on-road stability.

• 2.5-in. front shocks and 2.0-in. rears with remote (piggyback) reservoir.
• All tuning done in house by TRD engineers (by enthusiasts, for enthusiasts).
• Zinc finish with multilayer coating for extreme surface durability.
• TRD-tuned Eibach^® coil springs with custom rates.
• Engineered by TRD with unique components not found in aftermarket Bilstein^® shocks and tuned by TRD engineers to provide better ride quality and off-road performance.

TRD-Stamped Aluminum Front Skid Plate

The TRD Pro front skid plate helps keep the underbelly of your 4Runner well-armored against damage from flying stones, branches, ice chunks and other types of road debris. It’s crafted of stamped and formed 1/4-in.-thick silver powder-coated aluminum, and tested to ensure that it helps provide protection while preventing vibration stress and noise issues.

• Enhances 4Runner’s tough, capable stance.
• Helps protect vehicle underbody from damage that can result from flying stones, branches, ice chunks and other types of road debris.
• Made from stamped and formed 1/4-in.-thick silver powder-coated aluminum.
• Skid plate won’t interfere with or block the cooling system, while providing cutouts for unobstructed access to all maintenance points and vehicle tow hooks.
• Rigorous CAD simulations conducted by Toyota engineers help to ensure against vibration stress and noise issues.
• Easy, no-drill installation uses vehicle’s existing attachment mounts.
• Skid plate colors may vary.

17-In. Matte-Black TRD Alloy Wheels

These TRD Pro wheels deliver tough performance and durability along with some attention-grabbing looks.

• Off-road race-inspired 17-in. x 7-in. cast aluminum wheel with six (6) lug nuts pattern.
• 11 mm wheel offset widens the overall vehicle track width by 0.9 in. (22 mm) for a more aggressive stance.
• Matte black with red TRD logo on center cap.
• Incorporates the proper weight, offset and brake clearance to ensure proper fit, finish and reliability.
• Extensive ride, handling and strength tests ensure wheels meet TRD's high-quality standards.

TRD Pro Shift Knob (A/T)

Good looks and a solid shift feeling every time. The TRD Pro shift knob is sculpted and polished to give you both.

• Delivers an enhanced shifting feel while providing an impressive addition to your interior.
• Simple remove-and-replace installation with no drilling or special tools required.

TRD Pro Carpet Floor Mats

If you’re not covered in dirt, you’re not doing it right. But you can still keep your carpet pristine, thanks to TRD Pro floor mats. Featuring the TRD logo, they are designed to fit the footwell of your 4Runner just right.

• Help protect the original carpet from wear and stains.
• Designed to fit the vehicle’s floor pattern.
• Made of durable, fade-resistant carpeting.
• Quarter-turn fasteners on front floor mats and nibbed backing on all mats help keep mats in position.
• Removable and easy to clean.